Short answer: A dishwasher grinding noise usually means something hard — glass, a fruit pit, a bone — is caught in the filter, chopper or a pump. Switch it off and clear the filter area first. After weeks unused, a dry pump seal can grind briefly. Constant grinding with a clean filter points to a worn wash motor, typically $280–$520 in LA.
This guide is for anyone whose dishwasher has started grinding, crunching or rattling mid-cycle. It explains how to tell the sounds apart, how to clear debris without cutting yourself, which noises are normal, and what the repairs cost in Los Angeles County and Orange County.
What is that grinding noise in my dishwasher?
Usually debris: broken glass, a fruit pit, a bone or a label scraped off a jar, caught in the filter, the chopper or one of the two pumps. A modern dishwasher has a wash pump that sprays water through the arms and a drain pump that pushes it out. When the noise happens is the best clue to which one is involved.
| What you hear | Likely cause | What to do | Typical LA price |
|---|---|---|---|
| Grinding at the start of a cycle or while it drains | Debris in the drain pump | Clear the sump and pump | Free; $190–$330 if the pump is damaged |
| Grinding or crunching through the wash | Debris in the filter, chopper or wash pump | Clean the filter area; call if it continues | Free; $280–$520 if the wash pump or motor is damaged |
| Short grinding bursts, dishes come out clean | A built-in chopper working | Nothing | Free |
| Grinding or squeal on the first run after weeks unused | Dry pump seal | Add water before the first cycle | Free |
| Steady roar or grind that gets louder over weeks | Worn wash-motor bearings | Replace the wash pump and motor | $280–$520 |
| Rhythmic knocking or clunking | A spray arm hitting a tall item | Reload; spin the arms by hand | Free |
The timing tell comes from Miele: Miele links grinding at the start of a program, or about three-quarters of the way through, to a cherry pit or glass shard blocking the drain pump or the non-return valve. Many dishwashers drain at the start of a cycle and between phases, so the same tell is worth checking on other brands.
Is a grinding noise ever normal?
Briefly, yes, in two cases. Some dishwashers have a built-in chopper — a small blade in front of the pump that breaks up food — and Whirlpool says it can make a grinding noise at different points in the cycle. If the noise comes and goes and the dishes come out clean, that’s likely all it is.
The other case is a dry pump seal. A little water normally stays in the sump to keep the seals from drying out, as Whirlpool explains. On a new dishwasher, or one that sat unused for weeks — a vacation home, or an apartment empty between tenants — the seal can dry and grind or squeal on the first fill. Pour about a quart of warm water into the bottom of the tub before the first cycle. If the noise lasts beyond a cycle or two, have it checked. For rentals, it’s worth adding a run-and-listen test to your apartment turnover appliance checklist.
How do you clear debris safely?
Stop the cycle, cut the power, and work with gloves — glass is a common culprit, and Miele warns that splinters are hard to see in the pump. Running a dishwasher that’s grinding can crack a pump’s impeller — the small plastic fan that moves the water — or burn out the motor, so clear it before the next load.
- Cancel the cycle, then switch off the dishwasher’s breaker or unplug it. Never put a hand in the sump with the power on.
- Pull out the lower rack and bail out any water with a cup and sponge.
- Remove the filter, rinse it, and look into the opening below it with a flashlight. Pick out glass, pits, bones or labels with tongs or needle-nose pliers.
- If your model has a foreign-object cup in front of the pump, Whirlpool’s method is to press the tab in the center, pull the cup up, empty it and push it back down until it locks.
- If your model has a removable pump cover or non-return valve under the filter — Bosch and Miele publish steps for theirs — remove it as the manual shows and check the impeller. On a Miele, slight resistance when you turn it is normal.
- Put everything back, restore power, and run a short cycle with the dishwasher empty. Listen at the start and at each drain.
Stop and call if you can see glass you can’t reach, the impeller is cracked or won’t turn, water is leaking onto the floor, or you smell burning.
What if it still grinds with a clean filter?
Then a part is worn or damaged, and the sound usually tells a technician which one. These are the three we test.
Wash pump and motor
The wash pump, also called the circulation pump, is driven by the dishwasher’s main motor. As its bearings wear, the noise becomes a steady grind or roar through every wash, getting louder over weeks. Replacing the pump and motor assembly typically runs $280–$520 in Los Angeles.
Drain pump
Glass that reaches the drain pump can chip its impeller, leaving a grind or rattle at every drain even after the glass is gone. A new drain pump typically runs $190–$330.
Chopper blade
On models with a chopper, a bone or shard can chip the blade, so it scrapes on every rotation. Depending on the design, it’s replaced on its own or with the pump, and the price is set after diagnosis.
What does a grinding repair cost?
Clearing debris yourself is free, and it’s often the whole fix. When a part is damaged, our dishwasher diagnostic is $69 — trip, testing and a written quote — and it’s applied to the repair when you approve it. Typical Los Angeles County and Orange County prices, parts and labor: drain pump $190–$330, wash pump or circulation motor $280–$520, with the same fees in both counties and no travel charge.
Use the 50% rule: repair when the quote is under half the price of a comparable new dishwasher and the machine has life left — roughly 10–12 years for a mainstream model. A drain pump is worth doing on most dishwashers. A wash motor on a dishwasher near the end of that window is often where replacement wins.
When should you call a technician?
Call when the grinding continues with a clean filter, when the impeller is damaged or glass is out of reach, or when the noise is a steady roar that’s getting louder. Calls placed before noon are usually seen the same day across Los Angeles County and Orange County; later calls are typically next business day. Call (866) 696-7767 or book online, and see our dishwasher repair service for what we fix.
If the grinding comes with water left in the tub, our guide to a dishwasher not draining covers the drain side.
Frequently asked questions
Is it normal for a dishwasher to make a grinding noise?
Short bursts can be. Some dishwashers have a built-in chopper that grinds food at points in the cycle, and a pump seal that dried out after weeks unused can grind on the first fill. A loud, crunching or constant grind is not normal: switch the dishwasher off and check the filter area for glass or pits.
Can I keep running my dishwasher if it’s grinding?
It’s better not to. Glass or a pit in a pump can crack the impeller or overload the motor, turning a free cleanup into a pump replacement. Cancel the cycle, cut the power, and clear the filter and sump first. If it still grinds with a clean filter, have it checked before the next load.
Why is my new dishwasher making a grinding noise?
On the first cycles a pump seal that has never been wet can grind or squeal briefly; pouring about a quart of water into the tub before the first run helps. If the noise continues after a few cycles, call the manufacturer — a new dishwasher is under its warranty, and an independent repair could complicate a claim.
How do I get broken glass out of my dishwasher?
Switch off the breaker or unplug the dishwasher, put on gloves, and remove the lower rack and filter. Bail out the water, then pick shards out of the sump with tongs or needle-nose pliers. Check under the pump cover or non-return valve if your model has one, and run an empty cycle before loading dishes.
How much does it cost to fix a grinding dishwasher in Los Angeles?
Clearing debris costs nothing if you do it yourself. Our dishwasher diagnostic is $69 and is applied to the repair if you approve it. A drain pump typically runs $190–$330 and a wash pump or circulation motor $280–$520 in Los Angeles County and Orange County, parts and labor included.
