Cooktop troubleshooting guide
Most cooktop problems are wet or misaligned burner parts on gas models, a failed switch or element on electric ones, and the wrong pan on induction. Pick what yours is doing for safe checks for your type of cooktop and when to stop and call.
Last updated
Troubleshoot your cooktop
Add the brand and model number for brand notes and error codes, then pick what it's doing. Nothing you type leaves this page.
Brand-specific steps and error codes, if we know the series.
Can't find the label?
- Check the owner's manual, the receipt, the delivery paperwork or the registration card.
- If it's connected to the brand's app, the model number is in the app's device information.
- Can't read it? Take a photo with the flash off, holding the phone at a slight angle so it doesn't glare, then zoom in.
- Still nothing? Skip it. The guide works without a model number, and our technician will find it at the visit.
Cooktop burner not working
A gas burner that won't light usually has a wet or misaligned cap; an electric coil that won't heat may only need reseating or swapping; a glass-top zone that won't heat often has a failed switch or element. Check the breaker first on electric and induction cooktops.
Most likely, in the order we find it: Element, infinite switch, igniter, or gas valve.
-
Stop if you smell gas Gas cooktops only
Turn the knobs off. If the smell stays, leave the house and call SoCalGas at (800) 427-2200 or 911 from outside. Don't touch light switches or unplug anything on the way.
-
Dry and seat the cap and head Gas cooktops only
When cool, lift off the cap and the burner head, wash and dry them completely, and set the cap back flat and centered.
-
Clear the ports Gas cooktops only
Clear clogged ports with a straightened paper clip, not a toothpick.
Clicks but no flame after this: the igniter or the valve.
-
Check the breaker Electric cooktops and Induction cooktops only
Electric and induction cooktops use a double breaker. Switch it fully off, then on.
-
Turn off Control Lock Electric cooktops and Induction cooktops only
Glass cooktops lock their touch controls. A lock icon means hold the lock pad for 3 seconds.
-
Swap the coil Electric cooktops only
With the cooktop off and cool, unplug the dead coil element and plug it into a working spot of the same size.
Heats in the other spot: the receptacle or switch is bad. Doesn't heat anywhere: the coil needs replacing.
-
Call Electric cooktops and Induction cooktops only
Glass-top zones and induction zones that stay dead need the switch, element, coil or power board tested.
Still not working?
- What we check
- Element continuity, switch, igniter and valve
- Typical repair
- Electric element or infinite switch $150–$290 · Igniter electrode or spark module $160–$300Parts and labor, typical for LA, OC & Ventura; written quote before any work.
- The visit
- $69 diagnostic, applied to the repair · Usually same-day
Read: Electric Stove Burner Not Working? Causes, Checks, CostsGo through these steps one at a time
Cooktop burner stuck on high
An electric burner that glows red on every setting has a failed infinite switch or control relay. Don't keep using it. If it won't turn down or off, switch the cooktop off at the breaker and call.
Most likely, in the order we find it: A failed infinite switch or a shorted element terminal.
-
Cut the power if it won't turn off
If the burner stays red-hot with the knob off, switch the cooktop off at the breaker.
-
Check the knob
A cracked knob can slip on its shaft and show the wrong setting. Try the knob from another burner.
-
Call
The burner's switch or the control relay is the usual fix: quick, but not safe to put off.
Still not working?
- What we check
- Switch, terminal block, wiring
- Typical repair
- Electric element or infinite switch $150–$290Parts and labor, typical for LA, OC & Ventura; written quote before any work.
- The visit
- $69 diagnostic, applied to the repair · Usually same-day
Read: Electric Burner Stuck on High? Causes and What to DoGo through these steps one at a time
Gas cooktop clicking nonstop
A gas cooktop that keeps clicking usually has water in a burner or a knob that isn't fully off. Dry the burners and let the cooktop air out. If it still clicks when dry, a spark switch or the spark module has failed.
Most likely, in the order we find it: Moisture in the igniters, a cracked electrode, the spark switch or module.
-
Make sure every knob is off
A knob just past the OFF position keeps sparking. Push and turn each one fully off.
-
Dry the burners
After a boil-over or cleaning, water under the caps causes clicking. Take off the caps and heads, dry everything and leave the cooktop to air out for a few hours.
Most clicking stops once it's dry.
-
Seat the caps
Set each cap flat and centered on its head.
-
Call if it still clicks when dry
A spark switch or the spark module has failed. Switch off the cooktop's breaker if the clicking won't stop.
Still not working?
- What we check
- Dry and clean igniters, electrode, module
- Typical repair
- Igniter electrode or spark module $160–$300Parts and labor, typical for LA, OC & Ventura; written quote before any work.
- The visit
- $69 diagnostic, applied to the repair · Usually same-day
Read: Wolf or Viking Range Igniter Clicking? Causes and FixesGo through these steps one at a time
Induction cooktop not detecting the pan
An induction cooktop that won't detect a pan usually has a pan that isn't magnetic enough, is too small or isn't flat, or a zone with water or a spill on the controls. Try the magnet test first.
Most likely, in the order we find it: Pan material, sensor board, or power module.
-
Do the magnet test
A fridge magnet should stick firmly to the bottom of the pan. If it doesn't, the pan won't work on induction.
-
Match the pan to the zone
The base should cover most of the zone's ring and sit centered. Small pans may not be detected.
-
Check that the bottom is flat
A warped base, or a pan that rocks on the glass, may not be detected.
-
Clean and dry the controls
Water or a spill on the touch controls can lock them or cancel a zone. Wipe the glass dry.
-
Reset it
Switch it off at the breaker (or unplug it) for 1 full minute, then switch it back on.
Still not detecting a magnetic pan: the zone's coil or the power board needs testing.
Still not working?
- What we check
- Pan test, sensor and module faults
- Typical repair
- Induction power module $450–$900Parts and labor, typical for LA, OC & Ventura; written quote before any work.
- The visit
- $69 diagnostic, applied to the repair · Parts may need ordering
Read: Induction Cooktop Not Detecting Pan? Thermador FixesGo through these steps one at a time
Gas smell near the cooktop
A gas smell that lingers means leave first: don't light anything, flip switches or unplug anything, and call SoCalGas at (800) 427-2200 or 911 from outside. A brief whiff while a burner lights is normal; a smell that stays isn't.
Most likely, in the order we find it: A burner left on, a loose connection or a leaking valve.
-
Leave and call from outside
Get everyone out. From outside, call SoCalGas at (800) 427-2200 or 911.
-
Know what's normal
A short whiff while a burner clicks and lights is normal. A smell that stays with every burner off is not.
-
Repair after the utility clears it
Once the utility has made it safe, book a technician to repair the burner valve, the connector or the line on the appliance.
Still not working?
- What we check
- Valves, connections and a leak test
- Typical repair
- Gas burner valve $190–$360Parts and labor, typical for LA, OC & Ventura; written quote before any work.
- The visit
- $69 diagnostic, applied to the repair · The gas company first, then us
Cooktop error codes by brand
Most cooktops show few codes. If yours shows one, write it down exactly, switch the breaker off for 1 minute and back on, and if it returns, call with the code and the model number.
Where's the model number on a cooktop?
It's on a sticker called the rating label, and you can reach it without tools. The model number tells the tool above (and our technician) which series you have; the serial number on the same label holds the build date. Watch 0 and O, 1 and I, 8 and B.
- Open the cabinet doors under the cooktop and look up. A flashlight helps.
- Look here first: On the underside of the cooktop: the bottom of the burner box.
- Then check: On a side of the burner box, or in the owner's manual.
- Read the line marked Model (Mod., M/N or Model No.), not Serial (Ser., S/N). Copy every character, including anything after a dash or slash.
Look, don't touch: leave the gas line and the wiring alone.
Can't find the label?
- Check the owner's manual, the receipt, the delivery paperwork or the registration card.
- If it's connected to the brand's app, the model number is in the app's device information.
- Can't read it? Take a photo with the flash off, holding the phone at a slight angle so it doesn't glare, then zoom in.
- Still nothing? Skip it. The guide works without a model number, and our technician will find it at the visit.
| Brand | Model number starts with |
|---|---|
| Bertazzoni | PRO, MAST, HER … GAS: gas range · PRO, MAST, HER … DF: dual-fuel range (electric oven, gas burners) · PRO, MAST, HER … IN: induction range |
| Bosch | HGI, HGS: gas range · HII, HIS: induction range · HDI, HDS: dual-fuel range (electric oven, gas burners) · NIT: induction cooktop · NET, NEM: electric cooktop · NGM: gas cooktop |
| Café | C2S, C2Y: dual-fuel range (electric oven, gas burners) · CGS, CGY, CGB: gas range · CHS: induction range · CEP: electric cooktop · CGP: gas cooktop · CHP: induction cooktop |
| Dacor | HDPR, DOP: dual-fuel range (electric oven, gas burners) · HGPR, DTG: gas range · DTI: induction range |
| Electrolux | EI … GF, EW … GF: gas range · EI … IF: induction range · EI … EC: electric cooktop · EI … GC: gas cooktop · EI … IC: induction cooktop |
| Fisher & Paykel | RGV: gas range · RDV: dual-fuel range (electric oven, gas burners) · CI: induction cooktop · CE: electric cooktop · CG: gas cooktop |
| Frigidaire | FFGF, FGGH, FPGH, FCRG: gas range · FGIH, FPIH, GCRI: induction range · FFEC, FGEC: electric cooktop · FFGC, FGGC, FPGC: gas cooktop · FGIC, FCCI: induction cooktop |
| Gaggenau | CI, VI: induction cooktop · CG, VG: gas cooktop |
| GE | JGB, JGS: gas range · PGB, PGS: gas range · PHS: induction range · JP, PP: electric cooktop · JGP, PGP: gas cooktop · PHP: induction cooktop |
| GE Monogram | ZGP: gas range · ZDP: dual-fuel range (electric oven, gas burners) · ZGU: gas rangetop · ZHU: induction cooktop · ZEU: electric cooktop |
| JennAir | JDRP, JDSP: dual-fuel range (electric oven, gas burners) · JGRP, JGSP: gas range · JEC: electric cooktop · JGC: gas cooktop or rangetop · JIC: induction cooktop |
| KitchenAid | KFG, KSG: gas range · KCE: electric cooktop · KCG: gas cooktop · KCI: induction cooktop |
| LG | LRG, LSG: gas range · LSI: induction range · LCE: electric cooktop · LCG: gas cooktop |
| Maytag | MGR: gas range |
| Miele | HR … G: gas range · HR … DF: dual-fuel range (electric oven, gas burners) · HR … I: induction range · KM … G: gas cooktop · KM: cooktop |
| Samsung | NX: gas range · NY: dual-fuel range (electric oven, gas burners) · NA: gas cooktop · NZ: electric or induction cooktop |
| Thermador | PRG: gas pro range · PRD: dual-fuel pro range (electric oven, gas burners) · PRI: induction pro range · PCG, SGS: gas rangetop or cooktop · CIT: induction cooktop · CET: electric cooktop |
| Viking | VGR, RVGR, TVGR: gas range · VDR, RVDR, TVDR: dual-fuel range (electric oven, gas burners) · VGSU, VGRT, RVGC: gas cooktop or rangetop · VICU, RVIC: induction cooktop · VECU, RVEC: electric cooktop |
| Whirlpool | WFG, WEG: gas range · WCE: electric cooktop · WCG: gas cooktop · WCI: induction cooktop |
| Wolf | DF: dual-fuel range (electric oven, gas burners) · GR: gas range · IR: induction range · CT…I: induction cooktop · CT…E: electric cooktop · CT…G: gas cooktop · CG: gas cooktop · CI: induction cooktop · CE: electric cooktop · SRT: gas rangetop |
Brand notes
- Thermador. Thermador induction zones need magnetic, flat-bottomed pans that cover most of the zone. Thermador induction not detecting the pan
- Wolf and Viking. Constant clicking on a Wolf or Viking rangetop usually means moisture in a burner or a failing spark switch or module. Wolf and Viking range clicking
- Kenmore. Kenmore appliances are built by other makers, and the three digits before the dot in the model number say which: 110 is Whirlpool laundry, 795 LG refrigerators, 253 Frigidaire refrigerators and freezers. Error codes follow that maker. Kenmore appliance repair
More help with your cooktop
Questions people ask
What should I do if I smell gas near my cooktop?
Leave the house first. Don't light anything, flip switches or unplug anything on the way out. From outside, call SoCalGas at (800) 427-2200 or 911. Once the utility has made it safe, a technician can repair the burner valve, connector or line that leaked.
How much does cooktop repair cost in Los Angeles?
Most cooktop repairs we do in Los Angeles, Orange and Ventura counties run $150–$900 for parts and labor, for example igniter electrode or spark module $160–$300 and gas burner valve $190–$360. The diagnostic is $69, applied to the repair, and you get a written quote before any work starts.
Is it worth repairing my cooktop?
Usually, while the repair costs less than half the price of a comparable new cooktop and it has life left. Most cooktops last 13–15 years, and premium brands 15–20. Past that age, or when the quote passes half the new price, replacing it is usually the better buy, and we'll tell you so.
Checked everything? Call before noon for a same-day visit.
Dispatch answers the phone and the technician arrives with the likely parts. $69 diagnostic, applied to the repair. Written quote before any work.